วันเสาร์ที่ 24 ธันวาคม พ.ศ. 2554

>>Mercedes-Benz W196

Mercedes-Benz W196


Mercedes-Benz W 196 "Typ Monza"

Karl Kling driving W 196 at Nürburgring
The Mercedes-Benz W196 was the Formula 1 entry of Mercedes-Benz in the 1954 Formula One season and 1955 Formula One season, winning 9 of 12 races at the hands of Juan Manuel Fangio and Stirling Moss.
Its delayed debut on the 1954 French Grand Prix brought the streamlined "Typ Monza" body for the high speed track at Reims-Gueux (and later Monza), and scored a 1-2 victory with Fangio and Karl Kling plus a fastest lap with youngster Hans Herrmann.
Another remarkable first was the use of Desmodromic valves and fuel injection, based on previous experience collected with the engines of the Messerschmitt Bf 109 fighters. As the streamlined body was not situable for twistier tracks, causing a defeat at its second race at Silverstone, a proper open-wheel-version was introduced at the Nürburgring. Fangio, who had already won the first two GPs of 1954 with a Maserati, won this and the two following GPs, securing his 2nd World Championship. In late October, at the 1954 Spanish Grand Prix, the low-mounted Mercedes air-intake was clogged with leaves. The race was lost, and the air-intake moved to the top of the hood.
In the 1955 Formula One season, which was shortened after the 1955 Le Mans disaster, the Mercedes managed to win all but one race, the 1955 Monaco Grand Prix, where Hans Herrmann crashed in practice, and the other 3 cars did not finish. At his 1955 British Grand Prix home event, Stirling Moss finished 0.2 seconds ahead of Fangio for his first GP win.
For sportscar races of the 1955 World Sportscar Championship season, the Mercedes-Benz 300 SLR was derived from it.
The new 1954 Formula 1 rules allowed engines of 2.5 litres unsupercharged or alternatively 0.75 supercharged. The 1939 Mercedes 2-stage supercharged 1.5 litre 64.0 x 58.0 mm V8 (1493 cc/91.1 cuin) gave 278 bhp at 8,250 rpm with about 2.7 ata pressure. Halving this would have only given 139 bhp. The expected target range for competitive engines was 250 to 300 bhp. Studies by Mercedes showed that 290 bhp at 10,000 rpm could be achieved from 0.75 litres with a supercharger pressure of 4.4 ata. 390 shp would have been developed with 100 hp being required to drive the supercharger. Fuel consumption would have been 2.3 times higher than an unsupercharged engine developing the same power. Since 115 bhp/litre at 9,000 rpm was being developed by unsupercharged motorcycle racing engines, it was decided that a 2.5 litre engine was the correct choice. This was a significant change of philosophy, since all previous Mercedes-Benz Grand Prix engines since the 1920s had been supercharged.
The 2,496.87 cc (152.4 cuin) straight 8 (76.0 x 68.8 mm) gave 257 bhp at the 1954 French GP which was its first race. During 1955 this had increased to 290 bhp at 8,500 rpm. The 2,981.70 cc (181.95 cuin) sports car (78.0 x 78.0 mm) gave 310 bhp at 7,500 rpm and was a bored and stroked version of the F1 engine complete with desmodromic valves and fuel injection. Variable length inlet tracts were experimented with and four wheel drive considered. An eventual 340 bhp at 10,000 rpm was targeted for the 2.5 litre F1 motor.
After winning all three world championships it competed in, Mercedes withdrew from motorsport at the end of the 1955 season.

>>Mercedes-Benz W154

Mercedes-Benz W154

Mercedes-Benz W154
Category Grand Prix
Constructor Mercedes-Benz
Designer(s) Max Sailer, Albert Heess, Max Wagner, Rudolf Uhlenhaut
Technical Specifications
Chassis Oval tubular frame
Suspension (front) Independent suspension with wishbones, coil springs, hydraulic dampers
Suspension (rear) De Dion axle, torsion bars, cockpit adjustable hydraulic dampers
Engine M154 & M163 3.0 litre V12 supercharged front-engine, longitudinally mounted
Transmission Mercedes-Benz 5-speed
Competition History
Notable entrants Daimler-Benz AG
Notable drivers Rudolf Caracciola, Hermann Lang, Manfred von Brauchitsch, Richard Seaman
Debut 1938 Grand Prix De Pau
Races Wins Poles FLs
16 11

Drivers' Championships 1

The Mercedes-Benz W154 was a Grand Prix racing car designed by Rudolf Uhlenhaut. The W154 competed in the 1938 and 1939 Grand Prix seasons and was used by Rudolf Caracciola to win the 1938 European Championship.
The W154 was created as a result of a rule change by the sports governing body AIACR, which required supercharged engine capacities to be limited to 3000cc. Mercedes' previous car, the W125 used a 5600cc engine and was therefore ineligible to be entered. Mercedes decided that a new car, designed from the outset to comply with the new regulations would be preferable to modifying the existing car and thus designed the W154.
Although using the same chassis design as the 1938 car, a different body was used for the 1939 season and the M154 engine used during 1938 was replaced by the M163. As a result of the new engine, the 1939 car is often mistakenly referred to as a Mercedes-Benz W163.


Concept

For the 1938 season, Grand Prix racing's governing body AIACR moved from a formula limited by weight to one limited by engine capacity. This meant Mercedes-Benz's previous car, the W125, was not eligible for entry into 1938 Grands Prix. When designing the new car, Mercedes based the chassis on that used in the W125. The new engine regulations allowed a maximum capacity of 3000cc with a supercharger or 4500cc without. After testing both types, Mercedes chose to use a supercharged 3000cc variant.

Engine and transmission

Due to the new regulations, a completely new engine was used for the 1938 season. The M154 was a 3000cc supercharged V12, attaining an output between 425-474 horse power. In 1939, the 2-stage supercharged version of this 2,961.54 cc V12 engine (67.0 x 70.0 mm) recorded a test bed power of 476 BHP (483 PS) at 7,800 rpm.
To compensate for the smaller engine compared to the W125, the W154 had an extra gear with a 5-speed manual transmission. The first gear was protected by a latch to avoid being engaged accidentally.

Chassis and suspension


The W154 being demonstrated in 1986 by Hermann Lang
The chassis was largely based on that of the preceding W125. The frame was constructed using oval tubes made of nickel-chrome molybdenum to provide a stiff chassis.
The bodywork of the W125 was aluminium metal, which like its predecessors was left unpainted in its bare silver colour. This brought Mercedes' cars during this period, including the W154, the nickname of Silver Arrows.
The suspension was also near identical to the W125. The rear consisted of De Dion tube, a non-independent suspension designed to keep the two rear wheels in parallel using a solid tubular beam. The rear also had hydraulic rear dampers, which were possible to adjust from within the cockpit during a race.

>>Mercedes-Benz W136

Mercedes-Benz W136

Mercedes 170 DS
Mercedes-Benz 170 DS
Manufacturer Mercedes-Benz
Production 1935–1955
Predecessor Mercedes-Benz W15
Successor Mercedes-Benz W120
Mercedes-Benz W121
Class mid-size sedan
The Mercedes-Benz W136 (and similar W191) was Mercedes-Benz's line of four-cylinder automobiles from the mid-1930s into the 1950s. It became the foundation on which the company rebuilt after World War II because the tooling had survived Allied bombing.
The Mercedes-Benz 170 SV y 170 SD where also built briefly in Argentina from 1953-1955 in sedan, taxi, station wagon, pick-up and van versions.


Models

  • 1935–1942: 170 V sedan/cabriolet
  • 1946–1950: 170 V sedan/cabriolet
  • 1949–1952: 170 S/SAC/SBC
  • 1950–1952: 170 Va
  • 1952–1953: 170 Vb
  • 1953–1955: 170 S-V/S-D
  • 1949–1950: 170 D
  • 1950–1952: 170 Da/DaOTP
  • 1952–1953: 170 Db
  • 1952–1953: 170 Sb
  • 1952–1953: 170 DS

Gallery

>>Mercedes-Benz W125 Rekordwagen

Mercedes-Benz W125 Rekordwagen


The W125 Rekordwagen on display at the Mercedes-Benz museum in Stuttgart, Germany.
The Mercedes-Benz W125 Rekordwagen was an experimental, high-speed automobile produced in the late 1930s. The streamlined car was derived from the open-wheel race car Mercedes-Benz W125 Formel-Rennwagen, of which also a streamlined version was raced in 1937 at the AVUS in Berlin. The main difference to the Grand Prix race car, which had to adhere to the 750 kg (1653 lb) limit, was a bigger, heavier and more powerful engine.
The car is at display in the Mercedes-Benz Museum in Stuttgart.

1938 Mercedes-Benz W125 specifications

  • Engine: MD 25 DAB/3 60 Degree V12
  • Engine Position: Front Longitudinal
  • Aspiration: Twin Rootes superchargers
  • Valvetrain: DOHC 4 valves per cylinder
  • Displacement: 5,576.75 cc / 340.31 in³ (82.0 x 88.0 mm)
  • Compression: 9.17:1
  • Power: 541 kW / 736 PS @ 5800 rpm
  • Power/displacement 131.97 PS per litre (97.0 kW/L)
  • Power/weight: 621.1 PS per tonne (463 W/kg)
  • Transmission: 4 speed Manual

The record

Rudolf Caracciola's record of 432.7 km/h (268 mph) over the flying kilometre on 28 January 1938, still remains the fastest ever officially timed speed on a public road (at time of writing, 2006). It also was the fastest speed ever recorded in Germany until Rico Anthes bettered it with a Top Fuel Dragster on the Hockenheimring drag strip.
This record breaking run was made on the Reichs-Autobahn A5 between Frankfurt and Darmstadt, where onlookers were rattled by the brutal boom of the side spewing exhaust stacks as the silver car hurtled past. By nine that morning, Caracciola and team chief Alfred Neubauer were having a celebration breakfast at the Park Hotel in Frankfurt.
Sadly, popular driver Bernd Rosemeyer was later killed when trying to beat that record for Auto Union. This also put an end to the record attempts of Mercedes, even though Hans Stuck later wanted to beat the overall land speed record with the Porsche-designed Mercedes-Benz T80 which was powered by a 3,000 horsepower (2,200 kW) airplane engine.

วันศุกร์ที่ 23 ธันวาคม พ.ศ. 2554

>>Mercedes-Benz W125

Mercedes-Benz W125

Mercedes-Benz W125
Category Grand Prix
Constructor Mercedes-Benz
Designer(s) Max Sailer, Albert Heess, Max Wagner, Rudolf Uhlenhaut
Technical Specifications
Chassis Tubular frame
Suspension (front) Independent suspension with wishbones, coil springs, hydraulic dampers
Suspension (rear) De Dion axle, torsion bars, hydraulic dampers
Engine Mercedes-Benz M125 5.6 litre Straight-8 supercharged
Transmission Mercedes-Benz 4-speed transverse
Fuel Methanol/benzol blend
Competition History
Notable entrants Daimler-Benz AG
Notable drivers Manfred von Brauchitsch, Rudolf Caracciola, Hermann Lang, Richard Seaman
Debut 1937 Tripoli Grand Prix
Races Wins Poles FLs
12 6 6 6
Drivers' Championships 1
The Mercedes-Benz W125 was a Grand Prix racing car designed by Rudolf Uhlenhaut to race during the 1937 Grand Prix season. The car was used by Rudolf Caracciola to win the 1937 European Championship and W125 drivers also finished in the second, third and fourth positions in the championship.
The supercharged engine, with 8 cylinders in line (94.0 x 102.mm) and 5,662.85 cc (345.56 CID), attained an output of up to 595 horse power (444 kW) in race trim. The highest test bed power measured was 637 BHP (646 PS) at 5,800 rpm. It gave 245 BHP (248 PS) at a mere 2,000 rpm. In 1938, the engine capacity of supercharged Grand Prix cars was limited to 3000cc, and the W125 was replaced by the Mercedes-Benz W154.
The W125 was considered the most powerful race car ever for about 3 decades, until large capacity US-built V8 engines in CanAm sportcars reached similar power in the mid 1960s. In Formula One racing itself, the figure was not exceeded until the early 1980s, with the appearance of turbo-charged engines in Formula One.
The W125 reached race speeds of well over 300 km/h (186 mph) in 1937, especially on the AVUS in Berlin, equipped with a streamlined body.
In land speed record runs, a Mercedes-Benz W125 Rekordwagen was clocked at 432.7 km/h (269 mph) over a mile and a kilometer. This car was fitted with a DAB V12 engine (82.0 x 88 mm) of 5,576.75 cc (340.31 CID) with a power of 726 BHP (736 PS) at 5,800 rpm. The weight of this engine caused the car to weigh over the 750 kg maximum limit. So it never appeared in Grand Prix.


Concept

Due to the uncompetitiveness of their W25 car, Mercedes pulled out of the 1936 Grand Prix Season midway through the year in order to concentrate on designing a car that would see them return to the top of the rankings. A new racing department ('Rennabteilung') was set up within Mercedes-Benz in order to work on the car. Rudolf Uhlenhaut, previously a production car engineer for the company, was selected to lead the design team. Uhlenhaut had not previously designed a racing car, but had significant experience testing road cars on the Nürburgring race track, experience which allowed him to adapt his knowledge relatively easily to race cars.
When testing the old W25 car, Uhlenhaut remarked that the suspension was too stiff, preventing the wheels from following the road. During the test session, a wheel came off the car, yet Uhlenhaut continued to drive the car as if nothing had happened. This stiffness caused the chassis to flex and the rear axle to bend by up to 7-10 cm (3-4 inches) under braking. The brief for the new car included a stiffer chassis and more travel on the suspension to avoid the problems experienced in the 1936 car.

Chassis and suspension


The W125 cockpit
The W125 had a much stiffer tubular frame construction compared to the previous W25 model. This was achieved using oval tubes made of nickel-chrome molybdenum which flexed considerably less than the steel frame used in the W25.
The bodywork of the W125 was aluminium metal, which like its predecessor was left unpainted in its bare silver colour. This brought Mercedes' cars during this period (and rivals Auto Union, whose cars were the same colour) the nickname of Silver Arrows.

Engine and Transmission

With no regulations limiting engine size, other than the 750 kg total car weight limit, Mercedes designed a 5.6 litre engine configured with eight inline cylinders and an overhead camshaft for the W125. Named the M125, the engine was also fitted with a Roots type supercharger producing 632 lb·ft (857 N·m) of torque at the start of the season. The engines built varied in power, attaining an output between 560 and 595 horse power (418-444 kW) at 5800 rpm. Fuel used was a custom mix of 40% methyl alcohol, 32% benzol, 24% 'A'thyl alcohol and 4% gasoline light. The engine weighed 222 kg (490 lbs) - approximately 30% of the total weight of the car, and was mounted in the front of the car.
Like its W25 predecessor, the W125 used a 4-speed manual transmission. The gearbox design was changed to a constant mesh type, which provided better reliability compared to the unsynchronized transmission of the M25. In a constant mesh gearbox, the transmission gears are always in mesh and rotating, but the gears are not rigidly connected to the shafts on which they rotate. Instead, the gears can freely rotate or be locked to the shaft on which they are carried. The previous unsynchronised transmission required the gears to be spinning at roughly the same speed when engaged; otherwise, the teeth would refuse to mesh.

Racing History

The W125 made its first competitive outing in May at the 1937 Tripoli Grand Prix with Mercedes-Benz entering four cars. German Hermann Lang won his first Grand Prix motor race to give the W125 a victory on its début and provide Mercedes with their first victory over rivals Auto Union since May 1936. The next race was held at the AVUS motor-racing circuit in Germany, a 12-mile (19 km) long circuit consisting of two long straights of approximately 6 miles (10 km) length joined at either end by a curve. As such, it was possible for a car to reach its top speed. Mercedes entered two W125 cars, a streamliner which was modified from the original design to increase its top speed on the straights and a standard car driven by Richard Seaman in case of problems with the streamliner. The streamliner had a top speed 25 km/h (16 mph) faster than the regular car. On lap three of the race, the streamliner retired while leading due to a gearbox failure. Seaman's regular W125 finished in fifth position.

Hermann Lang demonstrating a Mercedes-Benz W125 at the Nürburgring in 1977. Lang drove a W125 to victory on its début.
At the Eifelrennen held at the Nürburgring circuit, Mercedes entered five W125's, including one driven by Christian Kautz fitted with the new suction carburettor supercharger system. Kautz finished in ninth, while team-mates Rudolf Caracciola and Manfred von Brauchitsch finished in second and third places. For the next race, Mercedes split their entries between two races which occurred within a week of another. Two cars were sent to the USA to compete in the Vanderbilt Cup, one of which was fitted with the suction carburettor supercharger used on Kautz's car, and three cars went to Belgium to compete in the first round of the 1937 European Championship. Richard Seaman finished second in the Vanderbilt, and third and fourth place were achieved in the Belgian Grand Prix. Following Seaman's success in the Vanderbilt with the new supercharger system, it was fitted to all of the W125s.
The following two races were also both part of the European Championship. The next round in Germany saw both Mercedes and rivals Auto Union competing on home soil. Mercedes triumphed, as Rudolf Caracciola took his first victory of the year and Manfred von Brauchitsch followed him home in second position. In the next round at Monaco, the positions were reversed as von Brauchitsch won and Caracciola finished in second. A third Mercedes W125, driven by Christian Kautz, took third place.
The non-championship Coppa Acerbo in Italy was the next event the W125 entered. During practice Richard Seaman crashed into a house and destroyed his car. Therefore only von Brauchitsch and Caracciola started the race. During the race, Seaman took over from Caracciola and despite an engine fire, he finished the race fifth. von Brauchitsch fared better finishing in second position. The Swiss Grand Prix was the penultimate round of the 1937 European Championship. Like in Monaco, Mercedes W125s finished in the top three places, Caracciola taking the win with Hermann Lang in second and von Brauchitsch third. The final round of the championship marked a return to Italy, where at the Livorno Circuit, Caracciola held off team-mate Lang to win the race by 0.4 seconds and become European Champion. von Brauchitsch retired from the race and took second place overall in the Championship. Kautz and Lang took third and fourth places meaning Mercedes drivers occupied the top four positions in the championship table.
The W125 entered into two non-championship events before the end of the season. The Masaryk Grand Prix in Czechoslovakia gave the W125 its final victory when Caracciola won the race, von Brauchitsch finished second and Seaman came in third. The race was marred as Hermann Lang had crashed into spectators on lap five, resulting in twelve injuries and two deaths. The final competitive race Mercedes entered the W125 into was the 1937 Donington Grand Prix. Rosemeyer prevailed, von Brauchitsch finished in second place and Caracciola in third while both of the other W125s failed to finish. The British ERA were outclassed, failing to get classified in their home race.

Retirement from racing

1938 saw changes in the rules, with the maximum limit on weight being replaced with a maximum limit on engine capacity and a minimum weight for the car being introduced. As such the W125 would not be eligible for entry without heavy modifications. Instead, Mercedes-Benz developed a new car, the Mercedes-Benz W154, and the W125 was withdrawn from racing.

>>Mercedes-Benz W123

Mercedes-Benz W123

Mercedes-Benz W123
1977 Mercedes-Benz 280E
Manufacturer Daimler Benz
Production 1976–1985
2,696,915 built
4-door: 2,397,514
Coupé: 99,884
Estate: 199,517
Assembly Sindelfingen, Germany
Predecessor Mercedes-Benz W115
Successor Mercedes-Benz W124
Class Executive car
Body style(s) 4-door saloon
2-door coupé
4-door estate
Engine(s) 2.0 L I4
2.2 L I4 Diesel
2.3 L I4
2.4 L I4 Diesel
2.5 L I6
2.8 L I6
3.0 L I5 Diesel
2.0 L I4 Diesel
Transmission(s) 4-speed automatic
4-speed manual
5-speed manual
Wheelbase Sedan: 2795 mm (110 in)
Coupé: 2710 mm (106.7 in)
Vehicles Mercedes-Benz E-Class
The Mercedes-Benz W123 cars were produced by the German manufacturer from 1976 to 1985.
The W123 models surpassed their predecessor, the W114/W115 "stroke-8" models, as the most successful Mercedes, selling over 2.5 million cars before being replaced by the W124 after 1985. Also in some cases a successor, the additional range of smaller Mercedes-Benz W201 models was introduced in 1982.


Naming

As usual, model names were related to engine sizes, type of engine and chassis type
  • D for Diesel,
  • E for Einspritzung (fuel injection)
  • Lang for Long Wheelbase
  • T for Transport and Touring (estate/station wagon)
  • C for Coupé

Model history


Mercedes-Benz C123

Mercedes-Benz W123 saloon (Euro-spec)

Mercedes-Benz W123 sedan (US)

Mercedes-Benz 300TD estate
Mercedes-Benz introduced the W123 four-door versions in January, 1976. While there was some technical similarities to their predecessors, the new models were larger in wheelbase and exterior dimensions. The styling was also updated, although stylistic links with the W115 were maintained. Initially, all models except 280/280E featured quad unequal-size round headlights and the latter large rectangular units. When facelifted these units became standard across the range. All W115 engines were carried over, with the 3 litre 5-cylinder diesel model being renamed from "240D 3.0" to "300D" (as it had already been called before in North American markets). The only new engine was the 250's 2525 ;cc inline-six (Type M123, a short-stroke version of the 2.8 litre six Type M110) that replaced the old 2496 cc Type M114 six.
In the spring of 1976, a coupé version was introduced on a shorter wheelbase than the saloon (2710 mm (106.7 in) versus 2795 mm (110 in)) for the saloon. This W123C/CE was available as a 230C (later 230CE) and as a 280C/CE in most markets; in North America there were additional 300CD versions with naturally aspirated, later turbocharged 3 litre diesel engines.
From August, 1977, long wheelbase versions (3425 mm (134.8 in)) were produced. These were available as 7/8 seater saloons with works bodies or as a chassis with complete front body clip, the latter serving as the base for ambulance and hearse bodies by external suppliers like Binz or Miesen. These "Lang" versions could be ordered as 240D, 300D and 250 models.
At the Frankfurt Auto Show in September, 1977 the W123T estate was introduced; the T in the model designation stood for "Touring and Transport". All engines derivative except "200TD" were available in the range. T production began in March, 1978 in Mercedes' Bremen factory.
In early 1979, the diesel models power output was increased; power rose from 55 PS (54 hp/40 kW) to 60 PS (59 hp/44 kW) in the 200D, from 65 PS (64 hp/48 kW) to 72 PS (71 hp/53 kW) in the 240D and from 80 PS (79 hp/59 kW) to 88 PS (87 hp/65 kW) in the 300D; at the same time, the 220D went out of production.
The first Mercedes turbo diesel production W123 appeared in September, 1979. This was the 300 TD Turbodiesel, available with automatic transmission only. In most markets, the turbocharged 5-cylinder 3 litre diesel engine (Type OM617) was offered only in the T body style, while in North America it was also available in saloon and coupé guises.
June 1980 saw the introduction of new 4-cylinder petrol engines (Type M102). A new 2 litre four with shorter stroke replaced the old M115, a fuel-injected 2.3 litre version of this engine (in 230E/TE/CE) the old carburetted 230. Both engines were more powerful than their predecessors.
In 1980/81 the carburetted 280 versions went out of production; the fuel-injected 280E continued to be offered.
In September, 1982, all models received a mild facelift. The rectangular headlights, previously fitted only to the 280/280E, were standardized across the board, as was power steering. Since February, 1982, an optional 5-speed manual transmission was available in all models (except 300 TDT).
W123 production ended in November, 1985. Most popular single models were the 240D (455,000 built), the 230E (442,000 built) and the 200D (378,000 built).
W123 introduced innovations including ABS (optional from August, 1980), a retractable steering column and an airbag for the driver (optional from 1982).
Available options included MB-Tex (Mercedes-Benz Texturized Punctured Vinyl) upholstery or velour or leather upholstery, interior wood trim, right hand side exterior mirror (LHD models, standard on T models), 5-speed manual transmission (European market only), 4-speed automatic transmission (standard in turbodiesel models), power windows with rear-seat switch cut-outs, vacuum powered central locking, rear-facing extra seats (station wagon only), Standheizung (prestart timer controller engine heating), self locking differential, sun roof, air conditioning, climate control, headlamp wipers (European market only), Tempomat (cruise control), power steering (standard after 1982/08), seat heating, catalytic converter (available from 1984 for California only, from fall (autumn) 1984 also in Germany for the 230E of which one thousand were built).
Power (vacuum servo) assisted disc brakes were standard on all W123s.

Models (except North America and Japan)

Chassis code Years Model Engine Power Torque
W123.020 1976–1980 200 2.0 L M115 I4 94 PS (93 hp/69 kW) @ 4800 158 N·m (117 lb·ft) @ 3000
W123.220 1979–1985 200 2.0 L M102 I4 109 PS (108 hp/80 kW) @ 5200 170 N·m (125 lb·ft) @ 3000
W123.280 1980–1985 200T 2.0 L M102 I4 109 PS (108 hp/80 kW) @ 5200 170 N·m (125 lb·ft) @ 3000
W123.120 1976–1979 200D 2.0 L OM615 I4 Diesel 55 PS (54 hp/40 kW) @ 4200 113 N·m (83 lb·ft) @ 2400
W123.120 1979–1985 200D 2.0 L OM615 I4 Diesel 60 PS (59 hp/44 kW) @ 4400 113 N·m (83 lb·ft) @ 2400
W123.126 1976–1979 220D 2.2 L OM615 I4 Diesel 60 PS (59 hp/44 kW) @ 4200 125 N·m (92 lb·ft) @ 2400
W123.023 1976–1981 230 2.3 L M115 I4 109 PS (108 hp/80 kW) @ 4800 185 N·m (136 lb·ft) @ 3000
W123.223 1979–1985 230E 2.3 L M102 I4 136 PS (134 hp/100 kW) @ 5100 201 N·m (148 lb·ft) @ 3500
W123.043 1977–1980 230C 2.3 L M115 I4 109 PS (108 hp/80 kW) @ 4800 185 N·m (136 lb·ft) @ 3000
W123.243 1980–1985 230CE 2.3 L M102 I4 136 PS (134 hp/100 kW) @ 5100 201 N·m (148 lb·ft) @ 3500
W123.083 1978–1980 230T 2.3 L M115 I4 109 PS (108 hp/80 kW) @ 4800 185 N·m (136 lb·ft) @ 3000
W123.283 1980–1985 230TE 2.3 L M102 I4 136 PS (134 hp/100 kW) @ 5100 201 N·m (148 lb·ft) @ 3500
W123.123 1976–1985 240D 2.4 L OM616 I4 Diesel 65 PS (64 hp/48 kW) @ 4200
from 02/79 72 PS (71 hp/53 kW) @ 4400
137 N·m (101 lb·ft) @ 2400
W123.125 1977–1985 240D LWB 2.4 L OM616 I4 Diesel 65 PS (64 hp/48 kW) @ 4200
from 02/79 72 PS (71 hp/53 kW) @ 4400
137 N·m (101 lb·ft) @ 2400
W123.183 1978–1986 240TD 2.4 L OM616 I4 Diesel 65 PS (64 hp/48 kW) @ 4200
from 02/79 72 PS (71 hp/53 kW) @ 4400
137 N·m (101 lb·ft) @ 2400
W123.026 1976–1985 250 2.5 L M123 I6 129 PS (127 hp/95 kW) @ 5500
from 09/79 140 PS (138 hp/103 kW) @ 5500
192 N·m (142 lb·ft) @ 3500
from 09/79 196 N·m (145 lb·ft) @ 3500
W123.028 1977–1985 250 LWB 2.5 L M123 I6 129 PS (127 hp/95 kW) @ 5500
from 09/79 140 PS (138 hp/103 kW) @ 5500
192 N·m (142 lb·ft) @ 3500
from 09/79 196 N·m (145 lb·ft) @ 3500
W123.086 1978–1985 250T 2.5 L M123 I6 129 PS (127 hp/95 kW) @ 5500
from 09/79 140 PS (138 hp/103 kW) @ 5500
192 N·m (142 lb·ft) @ 3500
from 09/79 196 N·m (145 lb·ft) @ 3500
W123.030 1975–1981 280 2.8 L M110 I6 156 PS (154 hp/115 kW) @ 5500 222 N·m (164 lb·ft) @ 4000
W123.033 1975–1985 280E 2.8 L M110 I6 177 PS (175 hp/130 kW) @ 6000
from 1978 185 PS (182 hp/136 kW) @ 5800
229 N·m (169 lb·ft) @ 4500
from 09/79 235 N·m (173 lb·ft) @ 4500
W123.050 1977–1980 280C 2.8 L M110 I6 156 PS (154 hp/115 kW) @ 5500 222 N·m (164 lb·ft) @ 4000
W123.053 1977–1985 280CE 2.8 L M110 I6 177 PS (175 hp/130 kW) @ 6000
from 1978 185 PS (182 hp/136 kW) @ 5800
229 N·m (169 lb·ft) @ 4500
from 09/79 235 N·m (173 lb·ft) @ 4500
W123.093 1978–1985 280TE 2.8 L M110 I6 177 PS (175 hp/130 kW) @ 6000
from 1978 185 PS (182 hp/136 kW) @ 5800
229 N·m (169 lb·ft) @ 4500
from 09/79 235 N·m (173 lb·ft) @ 4500
W123.130 1976–1985 300D 3.0 L OM617 I5 Diesel 80 PS (79 hp/59 kW) @ 4000
from 09/79 88 PS (87 hp/65 kW) @ 4400
169 N·m (125 lb·ft) @ 2400
W123.132 1977–1985 300D LWB 3.0 L OM617 I5 Diesel 80 PS (79 hp/59 kW) @ 4000
from 09/79 88 PS (87 hp/65 kW) @ 4400
169 N·m (125 lb·ft) @ 2400
W123.133 1981–1985 300D Turbo 3.0 L OM617 I5 Diesel 125 PS (123 hp/92 kW) @ 4350 245 N·m (181 lb·ft) @ 2400
W123.150 1977–1981 300CD 3.0 L OM617 I5 Diesel 80 PS (79 hp/59 kW) @ 4000
from 09/79 88 PS (87 hp/65 kW) @ 4400
169 N·m (125 lb·ft) @ 2400
W123.153 1981–1985 300CD Turbo 3.0 L OM617 I5 Diesel 125 PS (123 hp/92 kW) @ 4350 245 N·m (181 lb·ft) @ 2400
W123.190 1978–1985 300TD 3.0 L OM617 I5 Diesel 80 PS (79 hp/59 kW) @ 4000
from 09/79 88 PS (87 hp/65 kW) @ 4400
169 N·m (125 lb·ft) @ 2400
W123.193 1980–1985 300TD Turbo 3.0 L OM617 I5 Diesel 125 PS (123 hp/92 kW) @ 4350 245 N·m (181 lb·ft) @ 2400

North America and Japan

In these markets the following models were offered...:
Model Years Engine Power Torque
230 MY 1977−1978 M115 55.0 hp (41 kW) @ 4800 125 lb·ft (169 N·m) @ 2500
240D MY 1977−1983 OM616.912 62 hp (46 kW) @ 4000
from MY 1981 67 hp (50 kW) @ 4000
97 lb·ft (132 N·m) @ 2400
280E MY 1977−1981 M110 142 hp (106 kW) @ 5750
from MY 1980: 140 hp (104 kW) @ 5500
149 lb·ft (202 N·m) @ 4600
from MY 1980: 145 lb·ft (197 N·m) @ 4600
280CE MY 1978−1981 M110 142 hp (106 kW) @ 5750
from MY 1980: 140 hp (104 kW) @ 5500
149 lb·ft (202 N·m) @ 4600
from MY 1980: 145 lb·ft (197 N·m) @ 4600
300D MY 1977−1981 OM617.912 77 hp (57 kW) @ 4000
from MY 1981: 83 hp (62 kW) @ 4200
115 lb·ft (156 N·m) @ 2400
from MY 1981: 120 lb·ft (163 N·m) @ 2400
300CD MY 1978−1981 OM617.912 77 hp (57 kW) @ 4000
from MY 1981: 83 hp (62 kW) @ 4200
115 lb·ft (156 N·m) @ 2400
from MY 1981: 120 lb·ft (163 N·m) @ 2400
300D
(unofficially "300DT")
MY 1982−1985 OM617.952 120 hp (89 kW) @ 4350
from MY 1984: 123 hp (92 kW) @ 4350
170 lb·ft (230 N·m) @ 2400
from MY 1984: 184 lb·ft (249 N·m) @ 2400
300CD
(unofficially "300CDT")
MY 1982−1985 OM617.952 120 hp (89 kW) @ 4350
from MY 1984: 123 hp (92 kW) @ 4350
170 lb·ft (230 N·m) @ 2400
from MY 1984: 184 lb·ft (249 N·m) @ 2400
300TD
(unofficially "300TDT")
MY 1979−1985 OM617.952 120 hp (89 kW) @ 4350
from MY 1984: 123 hp (92 kW) @ 4350
170 lb·ft (230 N·m) @ 2400
from MY 1984: 184 lb·ft (249 N·m) @ 2400
The North American W123s differ from the European W123s due to United States Department of Transportation requirements.
Notable exterior differences included:
  • Larger bumpers
  • Round, sealed-beam headlights/fog lamps. Early cars were delivered with clear fog lamps through to model year 1979, later units with yellow
  • Location of ID-tag on A-pillar
  • Emission control devices

>>Mercedes-Benz W120/121

Mercedes-Benz W120/121

Mercedes-Benz W120/W121
W120 180 Ponton sedan
Manufacturer Daimler-Benz
Production 1953–1962
442,963 built
+ 25,881 190SL
Predecessor Mercedes-Benz W136/W191
Successor Mercedes-Benz W110
Class Midsize car
Body style(s) 4-door sedan
2-door roadster
Wheelbase 104.3 in (2649 mm)
Curb weight 2690 lb (1220 kg)

Mercedes-Benz W120 model at a petrol station, 1961
The Mercedes-Benz W120 and W121 "Ponton" cars were produced from 1953 through 1962. They were sold under the "180" and "190" model names. The Ponton models were replaced by the W110 "Fintail" models beginning in 1961. The 180 was the first 'small' Mercedes, it can be thought as the C-class of that era. Mercedes-Benz would return to this market segment in 1982 with the 190E. The W121 190 was the E-class of the time. All the 'Ponton' generation models looked very similar in appearance, one could not clearly identify even a 220SE from a 180, only after seeing its larger size and chrome touches was it possible to identify it as a different model. This was the only generation in which all models looked incredibaly similar, though the 300 was exclusive.
A roadster variant, the R121, better known as the 190SL, was produced from 1955 to 1963.
Mercedes also produced 6-cylinder Ponton models, the larger W128/W180 220s.

Models

Type Chassis code Years Model Engine Number built
W120 sedan W120.010 1953–1957 180 1.8 L M121 I4 52,186
1957–1959 180a 27,353
1959–1961 180b 29,415
1961–1962 180c 9,280
W120.110 1953–1959 180D 1.8 L OM636 Diesel I4 116,485
1959–1961 180Db 24,676
1961–1962 180Dc 1.8 L OM621 Diesel I4 11,822
W121 sedan W121.010 1956–1959 190 1.9 L M121 I4 61,345
1959–1961 190b 1.9 L M121 I4 28,463
W121.110 1958–1959 190D 1.9 L Diesel I4 20,629
1959–1961 190Db 1.9 L OM621 Diesel I4 61,309





Notes
R121 Roadster 121.040 hardtop 1955–1961 190SL 1.9 L M121 I4 921 engine
1962–1963 928 engine
121.042 soft top 1955–1961 921 engine
1962–1963 928 engine


>>Mercedes-Benz W114

Mercedes-Benz W114

Mercedes-Benz W114/W115
Mercedes-Benz 280C coupe (US)
Manufacturer Daimler-Benz
Production 1968–1976
1,919,056 built
Saloon: 1,852,008
Coupé: 67,048
Assembly East London, South Africa, Mercedes-Benz,Germany
Predecessor Mercedes-Benz W110
Successor Mercedes-Benz W123
Class Executive car
Body style(s) 4-door sedan
2-door coupe
Platform FR layout
Engine(s) 2.3L I6
2.5L I6
2.8L I6
2.0L I4
2.2L I4
2.3L I4
2.4L I4
3.0L Diesel I5
Vehicles Mercedes-Benz E-Class

The New Generation Models

Mercedes-Benz W114/W115 coupe

Mercedes-Benz 220 (W115) saloon

Mercedes-Benz 250 (W115) saloon: this post facelift version is distinguished by a flatter radiator grill and differing treatment below the front bumper / fender.

1972 250C
The Mercedes-Benz W114 (and similar W115) are smaller sedans and coupes first introduced within the 1968 Mercedes-Benz model line up. The 1968 W114/W115, the S-Class cars, and the 280SL were all marketed as the 'New Generation Models'. In fact the W114/W115 were the only truly new cars in the lineup, which included the then current 280S, 280SE and 280SEL from the W108 chassis, the 300SEL from the W109 chassis, which were introduced in 1965. And the W113 280SL which in 230SL form dated from 1963. All New Generation models bore the 'Stroke-8' "/8" suffix on their ID plates. However Stroke-8 (/8) is often used as shorthand for the W114/W115 models.


History

The presence of the W114/W115 chassis within the New Generation Models is significant as it was the first post-war Mercedes-Benz production car to use a newly engineered chassis, not derived in any way from preceding models. The new chassis format of semi-trailing rear arms and ball-joint front end, displayed in the W114/W115 chassis would be used in all new Mercedes passenger car models until the development of the multi-link rear suspensions of the 1980s. The W108/109 S-Class chassis of the 280S/8, 280SE/8 and 300SEL/8 (and W113 280SL Pagoda) would be the last of the low-pivot swing axle and king pin/double wishbone front ends. The next S-Class -the W116 chassis- having the same engineering of the W114/115. The improvement in handling and remarkable comfort would also make its way into the R107 SL-Class Roadster of 1971.
The W114 chassis used straight-6 engines and were sold under the "230", "250", and "280" model names. The W115 used straight-4 and straight-5 engines and were sold as the "200", "220", "230", and "240". The W114/W115 models replaced the W110 Fintail models beginning in 1968, and were themselves replaced by the W123 series after 1976.
The Mercedes-Benz W114/W115 was the upmarket executive mid-sized saloon model for Mercedes being somewhat smaller than the S-Class cars. Though not a particularly small car they are often referred to as the "Compact" model. Mercedes also launched its first 5-cylinder diesel engine OM617 in this chassis. This car had a distinctive appeal owing to its beautiful, classic (modern for the time) design and the superb level of integrity and refinement offered. The car was designed by famous French auto designer Paul Bracq who also designed several other Mercedes-Benz models, including the Mercedes-Benz 600, and for BMW. It was given a major facelift in 1973 - which included some exterior refinements such as a lower bonnet-line which meant a more imposing grill and lower placed headlamps, and no more old-fashioned quarter front windows and also two big rear view mirrors. In the interior inertia reel belts were introduced, a new-generation padded steering wheel was added with a modern 4-hole design and quite a few other minor changes took place.
A coupé variant of this model was introduced in 1969 with a 'C' designated after the model number. Where the saloon would just have '280E' written on the boot lid, the coupe would have '280CE'. The exclusivity of the coupe was reflected by a longer boot hood, the roof was given a 'Pagoda' SL - like touch and the 250C was fitted with a 2.8 litre 6-cylinder engine, whereas the saloon was fitted with the 2.5. Its overall design profile was breathtakingly beautiful, it is considered one of the finest classics of the 60's and 70's. It also had a more elegant rear window reminiscent of the "pagoda SLs", chrome strips down each side of the roof and a pillarless design where all the windows could be wound completely away for "summer motoring".

Innovations

Like its saloon variant this car also boasted advanced technological innovation. 1969 saw the introduction of the Bosch D-jetronic fully electronic fuel injection system into the 250CE. This was the first ever production Mercedes-Benz to use this system.
Other innovations in the W114/W115 models include a center console (a first in a Mercedes sedan), ribbed taillights in 1974. All coupe models used the 6-cylinder engine (and thus were W114s) and were designated with a "C" in the model name.
An interesting fact that should be added is that a Mercedes-Benz 220 D "pick-up" on the W115 chassis was built briefly in Argentina in 1970s.

North America

The W114/W115 was introduced in North America in 1968, but with fewer engine choices (as is the norm) than elsewhere. These models from the start had unique headlights, utilizing a sealed beam lamp instead of the H4 type used in the European models. Bumpers changed frequently and there were at least three different bumpers used over the production run in NA, and for 1974 the bumpers grew significantly, due to new DOT requirements. Many agree that these 'tacked-on' bumpers significantly detracted from the lines and the shape of the /8, though this wasn't the only model line that was affected during this era.
Today in America, many W114/W115s are still around, but the vast majority are those equipped with the nearly bullet-proof (Many get to 300,000+ Miles on a single motor) OM616 4-cylinder or the OM617 5-cylinder. Most North American 240Ds were equipped with a 4-speed manual, whereas all 5-cylinder 300D models were instead equipped with a (rather slow shifting) 3-speed automatic. Most agree the manual is more desirable due to these engines' low power ratings.

Models


W114

Chassis code Years Model Engine
Displacement Model Type Number built
W114.015 1968–1976 230, 230.6 2.3 L M180 I6 221,783
W114.010 1968–1972 250 2.5 L M114 I6 78,303
W114.011 1972–1976 250 2.8 2.8 L M130 I6 34,061
W114.021/022 1969–1976 250C/CE 2.8 L M130 I6 42,379
W114.060/062 1972–1976 280/E 2.8 L M110 I6 67,373
W114.073/072 1972–1976 280C/CE 2.8 L M110 I6 24,669

W115


1973 Mercedes-Benz 220D (W115)

1976 Mercedes-Benz 240D with US-Spec Bumpers
Chassis code Years Model Engine
Displacement Model Type Number built
W115.015 1968–1976 200 2.0 L M121 I4 288,785
W115.115 1968–1976 200D 2.0 L OM615 Diesel I4 339,927
W115.010 1968–1973 220 2.2 L M115 I4 128,732
W115.110 1968–1976 220D 2.2 L OM615 Diesel I4 420,270
W115.017 1973–1976 230.4 2.3 L M115 I4 87,765
W115.117 1973–1976 240D 2.4 L OM616 Diesel I4 131,319
W115.114 1974–1976 240D 3.0/300D 3.0 L OM617 Diesel I5 53,690

W115 long-wheelbase models

Chassis code Years Model Engine
Displacement Model Type Number built .
W115.112 1968–1973 200D Lang (LWB saloon) 2.0 L OM615 Diesel I4 4,027
W115.xxx 1973–1976 240D Lang (LWB saloon) 2.4 L OM616 Diesel I4 3,655
W115.017 1968–1976 230 Lang (LWB saloon) 2.3 L M180 I6 2,218 cars
+ 2,934 chassis