Honda Prelude

Honda Prelude
Manufacturer	Honda
Production	1978–2001
Assembly	Sayama, Japan
Successor	Acura Integra
Class	Sport compact
Body style(s)	2-door coupé
Layout	FF layout
Related	Honda Accord

The Honda Prelude is a sports coupe manufactured by the Japanese automaker Honda from 1978 through 2001. The two-door coupé spanned five generations and was discontinued upon the release of the fourth-generation Honda Integra in Japan in late 2001, due to its decreasing sales and popularity. In the U.S. auto market, the Accord coupe served as the de facto replacement to the Prelude, which ironically was based on the Accord.

The Prelude's perennial competitor has been the Toyota Celica, another I4-powered coupé introduced several years prior to the Prelude. Throughout the 1980s, it was challenged by the Nissan Silvia, Isuzu Impulse, Mitsubishi FTO, Mitsubishi Cordia (later the Eclipse), Ford Probe and Mazda MX-6. Out of that group, only the Eclipse survives all day today.

First generation (1978-1982)

First generation
Production	1978-1982
Engine(s)	1751 cc SOHC CVCC 72 hp (54 kW) I4
Transmission(s)	2-speed automatic 5-speed manual

The first generation Prelude was released in 1978, and was the third main model in Honda's modern line up, joining the Civic and the Accord. Its standard large glass moonroof was a feature seldom encountered in other cars at the time. Styling of the car was a combination of both then current Civic and Accord. The Prelude was equipped with a 1751 cc SOHC CVCC I4 engine that produced 72 hp (54 kW) and 94 ft·lbf (127 Nm) of torque with a five-speed manual transmission, and 68 hp (51 kW) with a two-speed automatic called the Hondamatic. In 1980, the two speed Hondamatic was replaced by a modern four-speed automatic. In Australia and the UK, this car was mostly sold with the 1602cc EL engine, developing 68 hp (51 kW).

Second generation (1983-1987)

Second generation
Production	1983-1987
Engine(s)	1.8L 100 hp (70 kW) I4 2.0L 110 hp (82 kW) I4
Transmission(s)	4-speed automatic 5-speed manual

The second generation Prelude was released in 1983 and was initially available with a A18 1.8-litre 12-valve twin carburettor engine, producing 100 hp (75 kW), and fuel injection was introduced in 1985, in the "Si" models. In Japan, Asia and Europe, it was available with a 2-litre DOHC 16-valve PGM-FI engine, although this engine was not released in Europe until 1986. (And these were different engines. The JDM B20A produced 160hp while the EDM produced only 137hp Honda B20A engine ) This was the first generation of Prelude to have pop-up headlights, which allowed for a more aerodynamic front which reduced drag. Opening the headlights however, especially at higher speeds, produced more drag. The 1983 model is identifiable by its standard painted steel wheels with bright trim rings (although alloy rims were optional). The 1984-87 base models had Civic-style full wheel covers.

When the 2-litre 16-valve DOHC engine came out, the bonnet was slightly modified, since the larger engine could not be fitted under the standard bonnet. The European version also saw slight modifications to the rear lights and revised front and rear bumpers which were now colour-matched. Due to the fairly low weight of the car (1025 kg) and high power (the 16-valve engine produced 137 hp (102 kW)), the car was relatively nimble in comparison to its competitors, which most Preludes had not been up to that time.

Third generation (1988-1991)

Third generation (BA5)
Production	1988-1991
Engine(s)	2.0L 104 hp (78 kW) I4 2.0L 135 hp (101 kW) I4 2.0L 140 hp (104 kW) I4 2.1L 140 hp (104 kW) I4 2.0L 142 hp (106 kW) I4 2.0L 150 hp (112 kW) I4
Transmission(s)	4-speed automatic 5-speed manual
Wheelbase	101 in (2565 mm)
Length	175.6 in (4460 mm) (1988-89) 177.6 in (4511 mm) (1990-91)
Width	67.3 in (1709 mm)
Height	51 in (1295 mm) (1988-89) 49.2 in (1250 mm) (1990-91)
Curb weight	2337 lb (1060 kg) - 2954 lb (1340 kg) (depending on model)
Fuel capacity	15.9 US gallons (60.2 L/13.2 imp gal)

The third generation Prelude (released in 1987 in Japan and a little later in some markets) was very similar to the second generation, however it gained four wheel steering on some models. It also came with some body changes that modernized the look. Engines available in the USDM were: in the 1988-1990 2.0S, the B20A3 which is a SOHC 12-valve dual sidedraft carburetted engine displacing 1958 cc that produced up to 104 hp (78 kW) and 111 lb·ft (150 N·m); in the 1988-1991 2.0Si, the B20A5 with DOHC and PGM-FI that increased power to 135 hp (101 kW) and 127 lb·ft (172 N·m), or a slightly-larger B21A1 in 1990 and 1991 described below. The B20A6 was the Australian model: a 2.0 DOHC 16-valve PGM-FI engine, also 1958cc, producing 142 hp (106 kW) and 127 lb·ft (172 N·m).

Engine List Honda Prelude:
- 2.0L DOHC PGM-FI B20A/B20A1 137/160 hp (Europe/Japan)
- 2.0L SOHC carb(12v) 104 hp B20A3 ?
- 2.0L SOHC carb(12v) B20A4 Non US
- 2.0L DOHC PGM-FI 135 hp B20A5 US
- 2.0L DOHC PGM-FI 135 hp B20A6 Australia/New Zealand
- 2.0L DOHC PGM-FI 150 hp B20A7 Europe
- 2.0L DOHC PGM-FI 133 hp B20A8 Europe
- 2.0L DOHC PGM-FI 140 hp B20A9 Europe
- 2.1L DOHC PGM-FI 145 hp B21A Japan (SI States)
- 2.1L DOHC PGM-FI 140 hp B21A1 Canada/US

Four-wheel steering:

The four-wheel steering system was a major piece of engineering. The reduced-price two-wheel-steering version has been criticised for severe understeer.

The third generation Prelude also had some new external designs worth mentioning. The hood line was designed to be the lowest hood line of any front wheel drive car in the world, allowing for better forward visibility. The drag coefficient was at the very low rating of .34. This gave better fuel economy, lower wind noise, and a greater level of high-speed stability.

Another unique structural element of the third generation Prelude was the high-strength metal used in the six roof pillars. The roof pillars were so slim that all-around visibility was amazingly clear for 326°. Some call this Prelude the "baby NSX" due to some common design cues between the two cars, such as the excellent forward visibility via a low bonnet line, a front end resemblance, the suspension attributes (great handling with a smooth ride), and the new design of the rear lights.

In 1987, Road & Track published a test summary that shows the 1988 Honda Prelude 2.0Si 4WS out slalomed every car of that year, including all Lamborghinis, Ferraris, and Porsches. It went through the slalom at 65.5 mph (105.4 km/h), an amazing result for the time. For reference, the 1988 Corvette took the same course at 64.9 mph (104.4 km/h).

The Prelude was Wheels magazine's Car of the Year for 1987.

1990

Rare 1990 SiStates Prelude

In 1990, the Honda Prelude was given a facelift from the previous third-generation styling to a newer look, chiefly in terms of the rear tail lights. The top of the rear bumper was also changed to meet up with the smaller lights, and the bumper was also made into a rounder shape.

The front bumper on the 1990 Prelude was also changed to feature clear indicators and park lamps that no longer wrapped around the corners of the bumper. Many of the interior parts were revised, including the dash bezel, the door handle and window switches, the steering wheel shape contours were changed, etc. The five-speed manual transmission had a unique gear ratio that offered easy acceleration at high speeds. The B21A1 engine became available in the "SE" trim level, which offered 4WS or ABS (called ALB). This engine is a B20A5 bored to 83 mm with a total displacement of 2056 cc producing up to 140 hp (104 kW). This version featured a unique cylinder liner that is reported to be extremely tough, but also to contribute to additional oil usage.

Honda also released the Prelude SiStates in 1990. Originally available only in Japan, this car was on a limited production run and very few were built. It featured four-wheel steering, ABS, limited slip differential (LSD), a leather-wrapped steering wheel and gear lever, extra sound deadening on firewall and hood, rear windscreen wiper and washer, and many more features that were usually options. It also featured a unique B21A engine rated at 150 bhp (112 kW) that was only produced for the SiStates.

A series labeled INX was available on the Japanese domestic market. These models had fixed headlights (similar in nature to the European Accord Sedan from 85-90). Three models were available XX, Si and Si SRS.

88-89 Front bumper

90-91 Front bumper

88-89 Rear bumper and tail lights

90-91 Rear bumper and tail lights

Fourth generation (1992-1996)

Fourth generation (BB4)
Production	1992-1996
Engine(s)	2.0L 133 hp (99 kW) I4 I 2.2L 135 hp (101 kW) I4 S 2.3L 160 hp (119 kW) I4 Si 2.2L 190 hp (142 kW) I4 VTEC
Transmission(s)	4-speed automatic 5-speed manual
Wheelbase	100.4 in (2550 mm)
Length	174.8 in (4440 mm)
Width	69.5 in (1765 mm)
Height	50.8 in (1290 mm)
Curb weight	2,840 lb (1,288 kg)
Fuel capacity	15.9 US gallons (60.2 L/13.2 imp gal)

In 1992, the fourth generation Prelude was released, after being released in Japan in 1991. The car had a 58% front and 42% rear weight distribution. The four wheel steering system was changed to an electronic version and the engine was increased in capacity from 2.1 litres to 2.2 litres for the base "S" model (SOHC F22A1 engine, 135 hp (101 kW) (101 kW) @ 5200 rpm, 142 ft·lbf (193 Nm) @ 4000 rpm) and "VTEC" model (DOHC VTEC H22a1, 190 hp (143 kW) @ 6800 rpm, 160 ft·lbf @ 5500 rpm), with a less performance-oriented 2.3-litre for the "Si" (DOHC H23A1, 160 hp (115 kW) @ 5800 rpm, 156 ft·lbf (212 Nm) @ 5300 rpm). The VTEC and Si Model had an upgraded brake system, going from a 10.3" front rotor to an 11.1" front rotor, utilizing a larger calliper and brake pad, similar to that from the Acura Vigor.

In the United Kingdom, there was also a 2.0i model that was rated around 133 bhp (99 kW). 1993 was the last year that the "Si-VTEC" name was used, and starting in 1994 it shortened to just "VTEC" and stayed that way throughout the rest of the generation. In some countries, the Prelude with 2.2 VTEC engine was called the VTi-R. In Canada, the Si was called the SR, and the VTEC was called the SR-V.

This model also marked the end for the pop-up headlights and other design features that had become "Prelude standard". The rear end was rounded and fairly high in comparison to the previous, flat boot line. The front fascia of the car became wider with fixed headlights. The glass sunroof made way for a steel sliding roof which no longer retracted into the car but extended out and over it. This in effect creates a spoiler which reduced air noise when driving.

The dashboard was generally accepted as the extraordinary feature of this model. The dashboard stretched from left to right in the car, being equal in height over the full length and housing all dials and indicators. The light blue back lighting introduced in the third generation was continued. Later models (1994 and on) also featured translucent speedometer and tachometer needles. All VTEC & SE models received leather interior. In Japan, there was also an in-dash television set available as an option; as a result, many enthusiasts have tried to modify the dashboards of their Preludes in order to fit a small television set. Also featured an 8 speaker audio system which included a center dash-mounted speaker and rear center subwoofer while the U.S. version received only 7 (center dash speaker not included). The Japanese version also included a Digital climate control A/C system. The Japanese version of the Prelude also had certain options which were never found in state-bound models but did show up in the Canadian market. For instance, the Japanese Prelude had power folding mirrors as well as a rear windscreen wiper, while the Canadian market was the one to have heated mirrors and optional heated seats. The Japanese model came with optional Honda Access accessories such as Typus ski racks, under dash lights, headrest covers, an air refiner, and floor mats, The Japanese SI came with the F22B (2.2L DOHC NON-VTEC 160 hp), Some of the Japanese domestic market fourth generation Prelude VTEC's did not come with options such as a sunroof and 4-Wheel Steering, as it is possible not to have these options when buying in Japan at the time. The fourth generation Prelude also shares some suspension components with the fifth (1994-97) generation Honda Accord.

Image:John's 94' Prelude.JPG

A heavily customized 1994 Honda Prelude VTEC

In the UK, the Honda Prelude was never considered an essential purchase by the majority of sports car enthusiasts who overlooked it for the more trendy Toyota MR-2 and other well-known rivals. Within the Honda range itself, the Prelude was usually overlooked for the more popular Civic and Integra models. This might be partly due to the Prelude's reportedly cramped interior, though perhaps the Prelude was also overshadowed by more prominent performance Hondas, such as the NSX and later the S2000. However, the Prelude is competitive in terms of style, speed and build quality, and it has achieved something of a cult status in the UK and US where demand is still high for the sportier, manual transmission versions. This demand is partly attributed to the still rising demand for customize-able cars. Both the 4th and 5th generations of the Honda Prelude emerged as popular choices for modders. They are easily modded and access to aftermarket/replacement parts is second to none.

Paint Codes

Phoenix Red R-51

Milano Red R-81

Cassis Red Pearl R-82P

Cobalt Blue Pearl B-54P

Fresco Blue Pearl B-64P

Pacific Blue Pearl B-68P

Brittany Blue Green Metallic BG-23M

Azure Blue Green Pearl BG-34P

Geneva Green Pearl G-62P

Sherwood Green Pearl G-78P

Granada Black Pearl NH-503P

Frost White NH-538

Sebring Silver Metallic NH-552M

Cashmere Silver Metallic YR-505M

--Honda Prelude Generation 4 Image Gallery--

Modified 1994 Prelude VTEC

1994 Prelude VTEC

1992 Prelude Si

Fifth generation (1997-2001)

Fifth generation (BB6)
Production	1997-2001 2.2L Vtec 195 hp (97-98) H22 I4 2.2L Vtec 200 hp (99-01) H22 I4
Transmission(s)	4-speed automatic 5-speed manual
Wheelbase	101.8 in (2586 mm)
Length	178 in (4521 mm)
Width	69 in (1753 mm)
Height	51.8 in (1316 mm)
Fuel capacity	15.9 US gallons (60.2 L/13.2 imp gal)

The fifth generation of the Honda Prelude saw enhancements over the fourth generation, including new body styling and handling characteristics. In 2002 the Prelude was discontinued.

The fifth generation retained a 13 layout with an independent front suspension. The car had a 63/37 weight distribution. All fifth-generation Honda Preludes came with 16 inch aluminium alloy wheels with all-season 205/50 R16 87V tires. Unlike the USDM Preludes, JDM Preludes came with rear wind screen wipers (except the Xi). All Prelude models now featured the 11.1" front brakes that the 96' VTEC model came with, and the prelude also received a 5-lug hub, as opposed to the 4-lug wheel hub of older models.

The fifth-generation Prelude marked a return to the body style of the late 1980s, or third generation, in an attempt to curb slumping sales of the fourth-generation body style. The fifth-generation was assembled and distributed to many parts of the world, including Japan, the UK, the US, and Germany, among others. All models and trims stayed within the BB-chassis code (BB5-BB9) and housed either the H-series or F-Series engine. Models available to the Japanese market included (engine compression ratio in parentheses): SiR (10.6), Xi (8.8), Si (9.2), SiR S-spec (11.0) and the Type S (11.0). The US received a Base model and Type SH. Canada received the Base model, SE, and Type SH. Europe received the 2.0i (9.5) and 2.2 VTi VTEC (10.0). Australia received the Si (10.0), the VTi-R (10.0) and the ATTS ((10.0). All fifth generation Preludes came with an H22A except: Xi (F22B), Si (F22B), 2.0i (F20A), Si (F22Z). BB5 was the Xi, and Si-2WS trim. BB6 was the SiR-2WS trim, SiR S-spec, Type S, Base model, Type SH, SE, 2.2 VTi VTEC-2WS trim. BB7 was the Si-4WS trim. BB8 was the SiR-4WS trim, and 2.2 VTi VTEC-4WS trim. All Preludes had a fuel tank capacity of 60 l (15.9 US gal).

One version of the fifth-generation Prelude, the Type S, was only available in Japan. It was equipped with the 2.2 l H22A, featuring VTEC and producing 223.1 hp (162 kW) @ 7200 rpm and 163 ft·lbf (221 Nm) @ 6500 rpm. With a compression ratio of 11.0:1, 87.0 mm bore x 90.7 mm stroke and the VTEC-valve timing, lift and duration were adjusted to 12.2 mm intake and 11.2 mm exhaust. Honda also overhauled the air box and replaced it with a more efficient design that is often referred to as Dynamic Chambering, along with a larger throttle body design bored to 62 mm (as opposed to the previous 60 mm). The exhaust system was also treated to a redesign, with the pipe cross sections becoming more cylindrical rather than oval. The three-way catalytic converter was also increased in size, as well as the exhaust piping from 50.8 mm (2.00 in) to 57 mm (2.25 in) (tToV). The fifth generation curb weight was 1310 kg (2882 lb), and ground clearance was 140 mm (5.5 in). Unlike the SiR S-spec that had an LSD, the Type S acquired the Honda technology known as the Active Torque Transfer System (ATTS). The gearing on the Type S matches all other fifth-generation Preludes that had a manual transmission except for the five-speed 2.2 VTi VTEC and had a final drive ratio of 4.266:1. The Type S had an Active Control ABS system, different from the others which had the standard ABS systems. The interior featured leather laced with red stitching. Manufacturer styling options included seat lettering. The exterior styling of fifth generation Preludes was standardized for most models. All had a sunroof except for the Type S model.

The MSDM fifth-generation Preludes also saw enhancements in the engine, with the full line now offering VTEC H22A4 engines, an evolution of the H22A1 with higher flowing heads, making 195 hp (143 kW) @ 7000 rpm and 156 ft·lbf (212 Nm) @ 5250 rpm from 1997 to 1999, and the same torque readings with 200 hp (147 kW) @ 7000 rpm from 1999 to 2001 with a compression ratio of 10.0:1. In some countries the Prelude was also offered with a base 2.0L 133 bhp engine. The USDM fifth-generation had a Type SH ("Super-Handling") trim which featured the ATTS, and, along with the five-speed base model, shared the same gearing as the Type S and SiR-S spec trims in Japan. This system allowed Honda to overcome the limitations of front-wheel drive somewhat, and in 1997, Car and Driver named the Prelude Type SH the "best-handling car under $30,000

In the fifth generation Prelude, all models with an automatic transmission featured SportShift technology. This 4-speed transmission allowed the driver to manually change gears in a manner similar to the Porsche tiptronic system. Gear selection was enabled by sliding the shifter horizontally from D4, the standard automatic position, to a separate track that allowed the shifter to be pushed forwards or backwards. At the time of the Prelude's release this type of feature was relatively rare, having been recently introduced in the Porsche 911 in the early 90's, but soon afterwards it became common in many sport coupés and sedans..

Safety

In Australia, 1983-2002 Honda Preludes were assessed in the Used Car Safety Ratings 2006.

• Prelude (1983-96) - "average" level of occupant protection
• Prelude (1997-2002) - "significantly better than average"

Awards

The Prelude was on Car and Driver magazine's annual Ten Best list ten times, from 1984-86, and from 1992-98.

Convertibles

Through the years, several German companies have converted Preludes into convertibles. Currently, there have been convertibles made from the first, second and fourth generation Preludes.

First generation Preludes were modified by a company called Tropic Design, located in Germany. In all, they modified 47 Preludes, most of which were exported to Japan . Very few have remained in Europe, initially all in Germany. Some have been sold over time to nearby countries, at least one to the Netherlands and one to Belgium.

Second generation Preludes were modified by another German company; some 100 Preludes were modified. No DOHC engine-equipped models have been known to be converted into convertibles, however. Three versions were available: a basic version, one which had more luxurious options, and one which added a body kit.

Of the fourth generation Preludes, only some 15 were modified into a convertible by German company Honda-Autohaus Manfred Ernst. No details are known about the engine types and other specifics. Since only 15 were ever made, they are assumed by many to be custom-built.