Lotus Elan
Lotus Elan | |
---|---|
Overview | |
Manufacturer | Lotus Cars |
Production | 1962–1973 |
Assembly | Hethel, England |
Body and chassis | |
Body style | 2-door coupe 2-door roadster |
Layout | FR layout |
Powertrain | |
Engine | Lotus TwinCam 1,557 cc (1.6 L) I4 |
Dimensions | |
Wheelbase | 2,134 mm (84 in) |
Length | 3,683 mm (145 in) |
Width | 1,422 mm (56 in) |
Height | 1,156 mm (46 in) |
Curb weight | 688 kg (1,517 lb) |
Chronology | |
Successor | M100 Elan |
Lotus Elan is the name of two convertible cars and one fixed head coupé produced by Lotus Cars. The original Type 26, 26RRacing version (of the S1 Elan), 36R Racing version (of the S2 Elan), 36 Fixed Head Coupe, 45 Drop Head Coupe, and the "Type 50" +2 Coupe, circa 1962 to 1975, are commonly known as the '60s Elans. The Type M100 from 1989 to 1995, is also commonly known as the 1990s Elan.
1960s Elan
The original Elan was introduced in 1962 as a roadster, although an optional hardtop was offered in 1963 and a coupé version in 1965. The two-seat Lotus Elan replaced the elegant, but unreliable and expensive to produce Lotus Elite.
It was the first Lotus road car to use the now-famous steel
backbone chassis with a fibreglass
body.
At 1,500 lb (680 kg), the Elan embodied the Colin Chapmanminimum weight design philosophy. Initial versions of the Elan were also available as a kit to be assembled by the customer. The Elan was technologically advanced with a DOHC 1557 cc engine, 4-wheel disc brakes, rack and pinion steering, and 4-wheel independent suspension. The "Lotus TwinCam" engine was based on Ford Kent Pre-Crossflow 4-cylinder 1498 cc engine, with a Harry Mundy-designed 2 valve alloy chain-driven twin-cam head. The rights to this design was later purchased by Ford, who renamed it to "Lotus-Ford Twin Cam". It would go on to be used in a number of Ford and Lotus production and racing models.
Lotus Elan +2 | |
---|---|
Overview | |
Production | 1967–1975 |
Body and chassis | |
Body style | 2-door 2+2-seater coupe |
Layout | FR layout |
Powertrain | |
Engine | Lotus TwinCam 1,557 cc (1.6 L) I4 |
Transmission | 4-speed manual all-synchromesh |
Dimensions | |
Wheelbase | 96 in (2,438 mm) |
Length | 169 in (4,293 mm) |
Width | 66 in (1,676 mm) |
Height | 47 in (1,194 mm) |
An Elan +2 was introduced in 1967 with a longer wheelbase and two more rear seats. The Elan +2 embodied the Lotus spirit: It was a fast and agile sport coupe. It combined the performance and reliability of the Elan "Coupe" with genuine 2+2 passenger comfort. Tested maximum power: 108-126 bhp (net) (depending on the model); top speed: 120 mph (190 km/h), 0–60 mph in 7.9 seconds, 0-100 mph 21.8 seconds. 5,200 Elans +2 were made: fewer than 1,200 of these cars remain in the roads today. Their relative rarity, beautiful lines, impressive performance and practicality are the main factors for the rising interest on these cars among collectors.
The Elan ceased production in 1973 and the Elan +2 in 1975, succeeded by Elite II and Lotus Eclat. An estimated total of 17,000 original Elans and Elans +2 were built. Because of its successful design and rigorous attention to cost control on the body, chassis, engine and the transmission, the Elan went on to become Lotus' first commercial success, reviving a company stretched thin by the more exotic and expensive to build Lotus Elite with fiberglass monocoque body/chassis and all-aluminium Coventry Climax engine; and enabled funding of the Lotus success in racing over the next ten years.
This generation of the two-seater Elan was famously driven by the character Emma Peel on the British television series The Avengers. In 2004, Sports Car International named the Elan number six on the list of Top Sports Cars of the 1960s. The original version of the car was designed by Ron Hickman,who also designed the first Lotus Europa as part of Lotus' GT40 project bid and made his fortune having designed the Black & Decker Workmate.
The original Elan is usually credited as being the design inspiration for the highly successful 1989 Mazda MX-5 (Mazda Miata in North America). Two Elans were intimately evaluated by Mazda in the process of designing the MX-5.
1990s Elan
Lotus Elan | |
---|---|
Overview | |
Manufacturer | Lotus Cars |
Production | 1989–1995 |
Assembly | Hethel, England |
Designer | Peter Stevens |
Body and chassis | |
Body style | 2-door roadster |
Layout | FF layout |
Powertrain | |
Engine | 1,588 cc Isuzu 4XE1 I4 1,588 cc Isuzu 4XE1-MT turbo I4 |
Transmission | 5-speed manual |
Dimensions | |
Wheelbase | 2,250 mm (88.6 in) |
Length | 3,803 mm (149.7 in) 3,870 mm (152.2 in) (US) |
Width | 1,734 mm (68.3 in) |
Height | 1,230–1,240 mm (48.4–48.8 in) |
Curb weight | 997 kg (2,198 lb) (NA) 1,075–1,110 kg (2,370–2,447 lb) (Turbo) |
The Lotus M100 Elan, launched in 1989, was a two-seater, convertible sports car designed by Lotus, with a reliable Japanese engine and manual transmission supplied by Isuzu, and built with the development and testing resources of General Motors. Around £35 million (about $55 million) was invested in its development, more than any other car in Lotus history. Its design, featuring a fibreglass composite body over a rigid steel backbone chassis, was true to Lotus founder Colin Chapman's original philosophy of achieving performance through low weight, and the name "Elan" connected the car with its 1960s ancestor, the original Lotus Elan.
Origins
In 1986 the purchase of Lotus by General Motors provided the financial backing to develop a new, small, affordable car in the same spirit as the original Elan (last built in December 1972). A development prototype, the M90 (later renamed the X100) had been built a few years earlier, using a fibreglass body designed by Oliver Winterbottom and a Toyota-supplied 1.6-litre engine and transmission. Lotus was hoping to sell the car through Toyota dealerships worldwide, badged as a Lotus Toyota, but the project never came to fruition and the prototype was shelved (although Lotus's collaboration with Toyota had some influence on the design of the Toyota MR2).
The idea of a small roadster powered by an outsourced engine remained, however, and in late 1986 Peter Stevens's design for the Type M100 was approved and work began by Lotus engineers to turn the clay styling buck into a car that could be built. This process was completed in just under three years, a remarkably short time from design to production car.
Testing
The M100 Elan was conceived as a mass-market car and in particular one that would appeal to US buyers. Consequently, Lotus put an enormous effort (for such a small firm) into testing the car; over a two-year period 19 crash cars and 42 development vehicles were built, logging nearly a million test miles in locations from Arizona to the Arctic. The Elan was driven at racing speeds for 24 hours around the track at Snetterton. Finally each new car was test-driven for around 30 miles (48 km) at Lotus's Hethel factory to check for any manufacturing defects before being shipped to dealers.
Handling
The choice of front-wheel drive is unusual for a sports car, but according to Lotus sales literature, "for a given vehicle weight, power and tyre size, a front wheel drive car was always faster over a given section of road. There were definite advantages in traction and controllability, and drawbacks such as torque steer, bump steer and steering kickback were not insurmountable." This was the only front-wheel-drive vehicle made by Lotus. Every model made since the M100 Elan, such as the Lotus Elise, has been rear-wheel drive.
The M100 Elan's cornering performance was undeniable (on release the Elan was described by Autocar magazine as "the quickest point to point car available"). Press reaction was not uniformly positive, as some reviewers found the handling too secure and predictable compared to a rear-wheel-drive car. However, the Elan's rigid chassis minimised roll through the corners and has led to its description as 'the finest front wheel drive [car] bar none'. Unlike the naturally aspirated version, the turbocharged SE received power steering as standard, as well as tyres with a higher ZR speed rating.
Engine
The M100 Elan used a 1,588 cc double overhead camshaft (DOHC) 16-valve engine, sourced from the Isuzu Gemini and extensively modified by Lotus (a third generation of this engine was later used in the Isuzu Impulse), which produced 162 horsepower (121 kW). 0–60 acceleration time was measured by Autocar and Motor magazine at 6.5 seconds, and a top speed of 137 mph (220 km/h) was recorded.
Significant differences in the Isuzu-Lotus engine from the original include a new exhaust system, re-routed intake plumbing for better thermodynamic efficiency, improved engine suspension, and major modifications to the engine control unit to improve torque and boost response. Almost all models featured an IHI turbocharger.
Sales
Two variants were available at launch, the 130 bhp (97 kW; 132 PS) Elan 1.6 (retailing at £17,850) and the 162 bhp (121 kW; 164 PS) Turbo SE (£19,850). Initial sales were disappointing, perhaps because its launch coincided with a major economic recession in the UK and USA, and perhaps also because it coincided with the cheaper Mazda MX-5 which was arguably similar in concept, though the MX-5 was quite intentionally nostalgic and old fashioned (apeing the original Elan), while the M100 was deliberately futuristic, modern and forward looking. The Elan was regarded as a good product in a bad market, but was also very expensive to make (the cost to design and produce the dashboard alone was more than the total cost of the Excel production line), and sales figures were too low to recoup its huge development costs. When Lotus was sold by GM to Bugatti, its new owners had no interest in continuing manufacture of the loss-making Elan.
Altogether 3,855 Elans were built between November 1989 and July 1992, including 129 normally aspirated (non-turbo) cars. 559 of them were sold in the US, featuring a 'stage 2 body' which had a different rear boot spoiler arrangement together with a lengthened nose to accommodate a USA-compliant crash structure and airbag, and 16-inch wheels (optional in most markets, standard in the U.S.) instead of 15-inch as on the UK model.
Series 2
A limited edition of 800 Series 2 (S2) M100 Elans was released during the Romano Artioli era (produced June 1994–September 1995) when it was discovered that enough surplus engines were available to make this possible. According to Autocar magazine, the S2 addressed some of the concerns over handling, but power was reduced to 155 bhp (116 kW; 157 PS) and the 0–60 acceleration time increased to 7.5 seconds, due to the legislative requirement to fit a catalytic converter in all markets. The S2s have very similar performance to the USA vehicles, having an identical engine management system calibration and a slightly lower overall vehicle weight.
Korean reintroduction
Kia Elan / Galloper Elan | |
---|---|
Overview | |
Manufacturer | Hyundai Precision & Industry Company Limited (HDPIC) |
Also called | Galloper Elan (Arabian Peninsula) Kia Elan (South Korea) |
Production | 1996–1999 |
Assembly | Daejeon, South Korea |
Body and chassis | |
Body style | 2-door convertible/roadster |
Layout | Front-engine, Front-drive |
After the final production run of the Elan in 1995, Kia Motors bought all the relevant license of Elan from Lotus to manufacture their own version. Outwardly, the Kia version looks almost identical to the original. The most obvious difference is the different taillights, which is of own design of Kia Elan, as the original Lotus version taillights was of Renault Alpine's. From 1996 to 1999, Hyundai Precision & Industry Company Limited (HDPIC) built the car as the Kia Elan for the Korean market, using a 151 hp (113 kW) 1.8 L T8D engine instead of the Isuzu-made 1.6. On Arabian Peninsula markets it was sold as the Galloper Elan.
2017 Elan
2013 Elan | |
---|---|
Overview | |
Manufacturer | Lotus Cars |
Production | 2017– |
Assembly | United Kingdom |
Body and chassis | |
Body style | 2-door |
Layout | Mid-engine, Rear-drive |
The new Lotus Elan was announced at the 2010 Paris Motor Show. It was hoped to be in production by 2013, but the company pushed it back for a 2017 release, as a way to further develop the current Evora. It will feature a 4.0-litre V6 engine and will weigh roughly 1,295 kg (2,855 lb) and will also feature optional hybrid technology with KERS which will be across the whole new Lotus range. It will mainly be aimed at buyers of the Porsche 911 and Aston Martin V8 Vantage.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น