>>1955 Ford

1955 Ford

Ford

Manufacturer	Ford Motor Company
Production	1955–1956
Assembly	Campbellfield, Victoria, Australia(Oceania only)
Predecessor	1952 Ford
Successor	1957 Ford
Class	Full-size Ford
Body style	4-door sedan 2-door coupe 2-door coupe utility (Oceania only)
Layout	FR layout
Engine	223 CID (3.7 L) OHV  I6 272 CID (4.5 L) Y-block V8 292 CID (4.8 L) T-bird  V8
Wheelbase	115.5 in (2,934 mm)

The Ford line of cars gained a new body for 1955 to keep up with surging Chevrolet, although it remained similar to the 1952 Ford underneath. The Mileage Maker I6 was bumped up to 223 CID (3.7 L) for 120 hp (89 kW) and the new-for-1954 Y-block V8 was now offered in two sizes: Standard Fords used a 272 CID (4.5 L) version with 162 hp (121 kW), but the large 292 CID (4.8 L) unit from the Thunderbird was also offered, boasting 193 hp (144 kW).

1955

1955 Ford wagon

Apart from the engine changes, customers were sure to notice the new Fairlane, which replaced the Crestline as the top trim level, while a new Crown Victoria-
style featured a chrome "basket handle" across the familiar (and continued) "Victoria" hardtop roof, which originally appeared on the Mercury XM-800 concept car. This use of a styling feature to visually separate the front of the passenger compartment from the rear reappeared on the 1977-1979 Ford Thunderbird, the Ford Fairmont Futura and Mercury Zephyr Z-7 coupes. The company now boasted three different rooflines, the tall two-pillar Mainline, Customline, and Fairlane, lower chrome-pillar Crown Victoria, and pillarless hardtop Victoria. The "Skyliner" acrylic glass roof was still offered, this time only on the Crown Victoria model. New brakes were used 11-inch (280 mm) drums. Also, Fords had a new frame with five cross members.

The Fords introduced for 1955 also featured the panoramic windshields found on Oldsmobiles, Buicks and Cadillacs the previous year. With this panoramic windshield the A-pillars have a vertical angle. this gives the driver more panoramic visibility.

For the first time, Ford offered seat belts as a dealer option (not factory installed, with instructions provided by a Service Bulletin).Also new for 1955 was Ford's first factory installed air conditioner. This “Select Aire” option featured an integrated heater core and evaporator coil unit within the dash and cold air discharge vents located on top of the dash  on either side of the radio speaker. The "Select Aire" design was carried over to the 1956 models with slightly different cold air vents in the same location as on the 1955 models. The condenser was mounted in front of the radiator as in later cars.

Station wagons were offered as a separate series for the first time in 1955.^{:p 395} The Ranch Wagon and Custom Ranch Wagon were 2 door wagons whilst the Country Sedan and Country Squire models were 4 doors wagons, the latter featuring wooden appliqué side mouldings.^{:pp 394-395}

1956

1956 Ford Fairlane coupe

1956 Ford Courier Sedan Delivery

The eggcrate grille featured on the 1955 cars was widened into a series of rectangles for 1956, but this subtle exterior change was nothing compared to Ford's adoption of a 12-volt electrical system across the line. The Crown Victoria Skyliner's sales were plummeting with just 603 made, and it would be replaced by a convertible the next year. A new addition at midyear was the "Town Victoria" 4-door hardtop model which, along with the new Customline 2-door hardtop, were meant to compete with the Chevrolet Bel Air. The Parklane, a Fairlane trimmed Tudor station wagon, was added to compete with the Chevrolet Nomad. Idiot lights for oil pressure and ammerter were standard.

The Lifeguard safety package — consisting of seat belts, a padded dashboard, a deep-dish steering wheel, and a breakaway rearview mirror — was introduced. The option was a slow-seller. The optional air conditioner, which remained expensive and thus a slow seller, was totally revamped; the compressor was now housed beneath the hood and the cooling vents were moved to atop the dashboard(it could not be ordered on the Thunderbird).

Australian production

1958 Ford Mainline Coupe Utility

The 1955 Ford was also produced by Ford Australia which offered it as a V8 Customline 4-door sedan and as a V8 Mainline 2-door coupe utility.^{:pp 131-132} The latter body style was developed in Australia utilising an imported convertible chassis strengthened for load carrying.^{:p 136} A limited number of Customline wagons was also built.^{:p 137} Customlines and Mainlines received the 1956 US Ford facelift and then further makeovers in 1957 and 1958 with the final series utilizing the grille from 1955 Meteor of Canada.^{:pp 131-132}Production ended the following year with the introduction of the 1959 US Ford which was locally produced in Custom 300, Fairlane 500 and Ranch Wagon models.